Product
Special kneader for NH screw discharge

company:Rugao Dongxing Machinery Co., Ltd.
E-mail:info@dx-kneader.com
mobile:13906273409
address:Dongchen Town Industrial Zone, Rugao City, Jiangsu Province

Hydraulic Turn-over Cylinder Discharge Electric Heating Vacuum Kneader

brand:Dx-Kneadervisits:31date:2019-02-28

Hydraulic Turn-over Cylinder Discharge Electric Heating Vacuum KneaderHydraulic Turn-over Cylinder Discharge Electric Heating Vacuum Kneader
Hydraulic Turn-over Cylinder Discharge Electric Heating Vacuum KneaderHydraulic Turn-over Cylinder Discharge Electric Heating Vacuum Kneader
Hydraulic Turn-over Cylinder Discharge Electric Heating Vacuum KneaderHydraulic Turn-over Cylinder Discharge Electric Heating Vacuum Kneader
Hydraulic Turn-over Cylinder Discharge Electric Heating Vacuum KneaderHydraulic Turn-over Cylinder Discharge Electric Heating Vacuum Kneader
Hydraulic Turn-over Cylinder Discharge Electric Heating Vacuum KneaderHydraulic Turn-over Cylinder Discharge Electric Heating Vacuum Kneader

Kneader-Applicable Industry

Kneader is an ideal equipment for kneading, mixing, vulcanizing and polymerization of high viscosity and elastic-plastic materials. Kneader can be used to produce silicone rubber, sealant, hot melt adhesive, food glue, pharmaceutical preparations, etc. Kneader is a special mixing equipment, the most commonly used is to use two_blades, parallel tangential differential arrangement, that is, the speed of one impeller is fast, the speed of one impeller is slow, in order to generate shear force, different impeller speeds make the mixing material can be quickly sheared, so that the material can be mixed evenly.

2. Kneader - Introduction

Principle of operation

Kneader is made of semi-dry or rubber-like viscous plastic materials by strong shear action produced by a pair of cooperating and rotating blades.

The material reacts rapidly to obtain a uniform mixing stirring. Kneading machine is mainly composed of five parts: mixing part, frame part, hydraulic system, transmission system and electronic control system. Hydraulic system is operated by a hydraulic station to complete the opening and closing function. Hydraulic system is operated by a hydraulic station to complete the functions of cylinder turning and capping. Detailed parameters can be selected and requested by users arbitrarily. The operation is convenient and reliable. The transmission system consists of motor, reducer and gear, and matching motor according to the type of kneader. The driving part of kneader is driven by synchronous speed of motor, through elastic coupling to decelerator, fast slurry is driven by output device, so that it can reach the required speed, and also can be adjusted by frequency converter.

The kneader has two_blades. The speed of the two blades is different. Different rotational speeds can be set according to different processes. The most common is that the kneader has two_blades.

The speed is 42/28 rpm. Kneading machine can be designed as heating and non-heating according to demand. The heat transfer modes usually include electric heating, steam heating, circulating hot oil heating, circulating water cooling, etc. The discharging methods of kneader include hydraulic cylinder tipping, ball valve discharging, screw extrusion, etc. The cylinder block and the contact part between the slurry blade and the material are made of SUS304 stainless steel to ensure the product quality.

☆☆二、性能介绍

1. Flexible Material Selection Scheme

Kneader can be customized with carbon steel, manganese steel, 304 stainless steel, 316L stainless steel, 321 stainless steel and other materials, and different materials can also be used in combination.

When selecting material for equipment, it should be distinguished from material contact part and non-material contact part.

Kneading machine can also be targeted to increase the internal anti-corrosion, anti-bonding, isolation, wear resistance and other functional coatings or protective coatings;

The surface treatment of stainless steel can be divided into sand blasting, wire drawing, polishing and mirror surface treatment, and can be applied to different parts.

2. Reliable Driver Configuration

The kneader is equipped with driving devices with different capacity, power and output speed according to material properties, starting mode and mixing mode.

The selection of driving motors includes: ordinary motor, riot-proof motor, frequency conversion motor, high efficiency and energy-saving motor, high protection level motor, and motor under different voltage.

3. Efficient agitator

The material of the impeller is tough and the structure is reliable. The advanced image of the impeller designed based on many years'experience is reasonable and scientific, and there is also an internal hollow impeller which can be cooled or heated for users to choose.

4. Excellent vacuum decompression

After using vacuum groove cover and vacuum shaft seal, mixing and kneading operation can be carried out under vacuum decompression (low temperature boiling, defoaming, dehydration to a certain extent).

5. Strong kneading groove

The structure of kneading groove is reliable. There are also jacketed kneading grooves which can be cooled or heated for users to choose.

6. Blending and kneading

When two strong and tough impellers are in motion, they produce enormous shear reduction force, thus achieving a high kneading effect.

7. Feeding and discharging

Mainly through the oil pressure (part of the machine is manual operation) is kneading trough dumping or reset, the opening and closing of the upper cover is also oil pressure operation (part of the machine is manual operation), feeding and discharging is very convenient. Moreover, if the feeding hole can be re-installed on the top cover, the feeding can be carried out from the top.

8. Cooling and heating

According to user's requirements, jacket jacket is installed on the outer wall of kneading tank, and the agitator is made into an inner hollow form, so that cooling or heating can be carried out.

9. other

According to the needs of users, it can also install load safety devices and various measuring instruments on the machine. Various specifications and motor power, etc. are sometimes changed due to improvement. Special design and manufacture can be carried out after negotiation with users according to the characteristics of processing quality.

3. Kneader-Selection

Design volume of kneader: 3-4000L;

1. Kneader can be made into ordinary, pressure, vacuum and high temperature type.

2. According to the material, it can be divided into carbon steel kneader, stainless steel kneader and special material kneader.

3. Discharge modes include hydraulic cylinder tipping, ball valve discharging, screw extrusion, etc.

4. According to the different heat-carrying medium, it can be divided into steam heating, electric heating of heat-conducting oil and water cooling.

5. According to the weight of load and impact degree, it can be divided into standard type and aggravating strength type.

型号

装载系数

捏合槽

主电机功率KW

出料方式

加热方式

搅拌桨转速rpm

NH-5

 

 

 

 

 

 

0.7

5

3

1.1-2.2

手动

翻缸

手动翻缸

下出料

33.23

NH-10

10

7

NH-50

50

33

5.5-7.5

 

 

 

 

 

 

 

液压

翻缸

液压翻缸

下出料

45.23

NH-100

100

70

7.5-11

35.22

NH-200

200

150

11-18.5

液压翻缸、

螺杆出料、

下出料

37.21

NH-300

300

230

18.5-22

NH-500

500

350

22-30


NH-1000

1000

700

37-110

 

NH-1500

1500

1100

NH-2000

2000

1500

55-110

NH-3000

3000

2400

75-160

NH-4000

4000

3000

90-160

 

 


TAG:

86-0513-87541121

Company:Rugao Dongxing Machinery Co., Ltd.
E-mail:info@dx-kneader.com
Mobile:86-13906273409
Address:Dongchen Town Industrial Zone, Rugao City, Jiangsu Province

©2018-2019 en.dx-kneader.com Rugao Dongxing Machinery Co., Ltd. Copyright Su ICP No. 18041955-1

Tech Suport:ntqswl
展开 收缩